Helpful hints and guides to make the most of our hearing aid accessories.

easyTek Support

The easyTek in detail.

easyTek_features-graphic_B2C_950x1108px

(1) Multi-function button

(2) Neckloop antenna

(3) Microphone openings

(4) Status information with LED indicators

(5) Neckloop ports

(6) Volume buttons

(7) Port for audio devices with 3.5 mm jack

(8) Port for FM receiver

(9) Reset button

(10) Micro-USB port for charging

Easy pairing.

Hearing aids: Step 1

Put easyTek around your patient’s neck. Turn easyTek on by pressing (1) until the green LED (4) turns on.

easyTek_easy-pairing_1_768x400px

Hearing aids: Step 2

Put the hearing aids into the ears and turn them on. The green LED (4) flashes briefly and then slowly fades. Now the hearing aids and the easyTek are paired.

easyTek_easy-pairing_3_768x400px

Bluetooth®-enabled devices: Step 1

Turn the easyTek on by pressing and holding (1) for several seconds. If the blue LED (4) does not automatically start flashing, press (1) and volume button “+” (6) until it does.

easyTek_easy-pairing_2_768x400px

Bluetooth-enabled devices: Step 2

Turn on the Bluetooth function of the device you want to pair with the easyTek. Search for easyTek and select it. The blue LED (4) flashes briefly and then slowly fades.

easyTek_easy-pairing_4_768x400px

TV Transmitter: Step 1

Turn the easyTek on by pressing and holding (1) for several seconds. Press (1) and both volume buttons (6) simultaneously until the blue LED (4) flashes.

easyTek_easy-pairing_2_768x400px

TV Transmitter: Step 2

Turn the TV Transmitter on within 1m of easyTek and wait for the pairing to complete. This takes approximately two minutes. The blue LED (4) will stop flashing and remain on.

easyTek_easy-pairing_5_TV-transmitter_768x400

How to handle easyTek